DMD-400-20-XR-200 Dump Pump, G Series Direct Mount - AFTERMARKET
Specifications
CW
3 Piece Cast Iron Design
High Pressure Shaft Seals
Factory Set 2000 PSI Relief w/ Load Check
Pressure Balanced Thrust Plates
Heavy Duty Roller Bearings
Two Or Three Line Hook Up
7/8 13 Tooth Spline Shaft
15 GPM at 1000 RPM to 37 GPM at 2400 RPM
Design Attribute
-Standard Pump Features
-Heavy duty roller bearings
-Pressure balanced thrust plates
-High pressure shaft seals
-Aluminum detent cover
-Factory set relief pressure
-2 or 3 line configuration
-Extended mounting studs
-Doweled construction for higher pressure
-Manual inspection of spool shaft and visual inspection of pump
-Batch tested to assure proper flow, pressure, relief valve operation and overall efficiency
Premium “T” Pump Features
Heavy duty roller bearings
Pressure balanced thrust plates
-High pressure shaft seals
-Aluminum detent cover
-Factory set relief pressure
-2 or 3 line configuration
-Extended mounting studs
-Doweled construction for higher pressure
-Manual inspection of spool shaft and visual inspection of pump
-Test is conducted at 1000 RPMS
-Oil temperature is maintained at 100 degrees Fahrenheit
-Relief valve at full flow to not exceed 2300 PSI
In Order to Pass The Quality Test, The Pump Must Perform to The Following Specifications:
-Minimum flow of 25 GPM at 1500 PSI
-Relief valve maximum pressure differential (crack to full flow) to not exceed 250 PSI
-Minimum overall volumetric efficiency at 92% or more
-A copy of the computer generated test results is included with each pump
CROSS REFERENCES: 3089310416,
| G102RH | S2LD1-15-02BPRR | PMRDMD40020XR200 | PMR-DMD-400-20-XR-20 |
| S S-18554 | DMD-400-20-XR-200C8T | MPGS-18554 | ATX18554 |
| DMD-400-20-XR-200-RC | ATP18554 |
RETURNS POLICY
A " Return Authorization Number " must be obtained before returning a product. Any returns without the Return Authorization Number will NOT be processed. Fleetsworld.com will not be responsible for unauthorized returns. Please send your return request to support@fleetsworld.com. You will receive an authorization number along with the return instructions via email.
Return Information
* Items must be returned within 30 days of the original invoice date.
* A 18 % restocking fee applies to all returned products.
* All parts must be in new condition and perfect condition and contain all components.
* Returns will not be accepted if the part was installed, modified , misused or in unsalable condition.
* The items must be in the original packaging.
* Some items are special orders and therefore are non-returnable.
* Fleetsworld.com is not responsible for refunds and/or return freight charges.
* All sales are final after 30 days.
* Unacceptable returns will be sent back to the customer on request at the customer's expense.
Returns Instruction
* Contact our support department at support@fleetsworld.com.
* Our support department will contact you by e-mail or phone within 24-72 hours (excluding weekends).
* Our support department will issue a return authorization number and provide further instructions to complete the return.
